PU Sealant Bonding and Moisture Proofing for Wood
SV One component polyurethane with lasting elastic waterproof material
Applications
1.Waterproofing and moisture proofing for kitchen, bathroom, balcony,
roof and so on.
2.Anti-seepage of reservoir, water tower, water tank, swimming pool, bath,
fountain pool, sewage treatment pool and drainage irrigation channel.
3.Leak-proofing and anti-corrosion for ventilated basement, underground
tunnel, deep well and underground pipe and so on.
4.Bonding and moisture proofing of all kinds of tiles, marble, wood,
asbestos and so on.
Technical Data Sheet
Operation
Preparation for Operation:
1. Tools: The serrated plastic board, brush, plastic barrels, 30Kg electronics,
rubber gloves and cleaning tools like blade .etc
2. Environmental requirements:The temperature is 5~35 C and the humidity is
35 ~ 85%RH
3. Cleaning:The substrate surface must be solid, dry and be clean. Such as no
dust, grease, asphalt, tar, paint, wax, rust, water repellent, curing agent,
isolating agent and film. Surface cleaning can be dealt with by removing, cutting,
grinding, cleaning, blowing, and so on.
4. If there are cracks on the substrate surface, first step is to fill them, and the
surface should be leveled. Operation after the sealant curing more than 3mm.
5.Theoretical dosage: 1.0mm thick, 1.3 Kg / coating needed.
Our Factory
Application
1. Protection:
If necessary,a proper protective layer can be operated on the surface of the
coating.
2. Tools Cleaning :
It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol
and other alcohol solvents.If it is not used for a long time, it should be cleaned
immediately with alcohol or other organic solvents. The cured glue can only be
scraped or torn off.
Packing
1KG/Drum, 5Kg/Drum,
20KG/Drum, 25Kg/Drum.
Contact us
Audited Supplier 
){kind=link}