SV 668 Aquarium silicon acid aquarium silicone sealant
SV668 Aquarium Silicone Sealant is one- component, moisture curing acetic silicone sealant. It cures fast to form a permanently flexible, waterproof and weather resistant silicone rubber.
Features
• long shelf life
• non-sag • excellent tooling characteristics for professional use
• readily gunnable both at low (+5 °C) and high (+40 °C) temperatures
• rapid crosslinking: quickly becomes tack-free and crack resistant
• flexible at low (-40 °C) and high temperatures (+150 °C) following cure
• low shrinkage on curing • special high-viscosity paste • excellent mechanical properties
| Product |
Acetic Curing Silicone Sealant for Aquarium and Fish Tank |
| Model No. |
sv688 |
| Type |
Acetic |
| Quality guaranteed |
25 years after proper application |
| Color |
Clear, Black, White, Gray or as customized |
| Usage temperature |
+5ºC~+40ºC |
| Applicated temperature |
-40ºC~+150°ºC |
| Packing |
300ml/Cartridge, 24pcs/Carton
590ml/Sausage , 20pcs/Carton |
| Shelf life |
15 months from the date of manufacture |
| Application |
Structural bonding and sealing of aquarium, high-quality glass, large plate glass; assembling and sealing of high-end glass. |
Silicone sealant application
1. The installation of large aquarium adhesive sealing
2. Repair aquarium
3. Glass assembly
How to use
- Light a candle around the windows and exterior doors that you think have air leaks. If the flame dances around, there is air flow and you have a leak
- Clean area to be sealed
To ensure proper adhesion, remove any old caulk and paint. Make sure the area is free from dust, grease and loose/flaking paint.
- Prep the caulking gun
Cut the seal at the top of the sealant bottle,(if the gap is outside) using a knife or secateurs. Cut the nozzle at a 45° angle with an opening that is approximately the size of the hole being filled. Fit the nozzle to the top of the cartridge and insert it into the caulking gun by pushing the base of the canister into the gun.
- Caulk the leak
Apply steady pressure to the caulking gun trigger to force the gap filler into the area that causes the leak. Move the nozzle along the joint in one smooth action. At the end of each section wipe excess product away with a finger, spoon or spatula dipped in a 50/50 mix of water and detergent.
- Finish
Clean up the excess sealant with a damp cloth immediately. Allow it to cure for about 30 minutes before painting.
Related products
We are professional silicone sealant supplier with 16 years experience.
Our factory founded in 2006. Now, we are NO.7 silicone sealant manufacturer in China:
1/ Located in Quzhou city of Zhejiang province in China.
2/ Factory area: 200000 square meters
3/ Registered capital:200000000RMB. Total investment: 800000000RMB.
4/ Workers: More than 500.
5/ Annual output value: 100000 ton.
6/ Equipment:100000 ton organic silicon monomer device;30000 ton 107 glue device; 30000 ton 110 glue device; 3200 ton gas white carbon black device and so on.
7/ Cooperate philosophy: Integrity, pragmatic, synergy.
8/ Mission: Create a beautiful home.
Sealant Package
300ml *24cartridges/carton; or 590ml *20sausages/carton; or as request
Transport and storage
This product is flammable but not explosive, and can be delivered by normal means of transportation.
The products must be stored under 27 degree, in the cool and dry place.
Safety
It has no toxicity after entirely cured. Avoid eye contact it when operating. If happened, rinse opened eye under running water for several minutes. During the curing process, sealant will release a small amount of organic molecules. Construction should ensure good ventilation. If necessary, take protective measures. Please keep out of reach of children.
Audited Supplier 
){kind=link}