SV 8000 adhesive polyurethane sealant for insulating glass
Features
• Complies with JC/T 914-2014 Polyurethane Sealant Standard For Insulating Glass
• One component, no vulcanization and non-fogging
• Safe and environmentally friendly without any solvents
• Excellent sealing, waterproof performance and long service life
• Non-corrosive to metals, coated glass, concrete, marble, granite, etc
• Excellent aging resistance, good plasticity and sealing over a wide temperature range, no cracking or hardening on the surface
• It has an extremely low water vapor transmission rate and is an effective guarantee for the production of high quality insulating glass
• High cohesive strength for the production of large plates of insulating glass
Two component sealant for insulating glass is a two component, neutral curing, silicone sealant, specifically designed for secondary sealing of insulated glass units (IGU).
Elastomer sealing with excellent weather resistance and temperature tolerance is formed by mixing and curing of the two components at the designed ratio.
Sealant application
Two component polyurethane sealant designed for use as sencond sealant in insulating glass units.
Make your life better
How to use
- Light a candle around the windows and exterior doors that you think have air leaks. If the flame dances around, there is air flow and you have a leak
- Clean area to be sealed
To ensure proper adhesion, remove any old caulk and paint. Make sure the area is free from dust, grease and loose/flaking paint.
- Prep the caulking gun
Cut the seal at the top of the sealant bottle,(if the gap is outside) using a knife or secateurs. Cut the nozzle at a 45° angle with an opening that is approximately the size of the hole being filled. Fit the nozzle to the top of the cartridge and insert it into the caulking gun by pushing the base of the canister into the gun.
- Caulk the leak
Apply steady pressure to the caulking gun trigger to force the gap filler into the area that causes the leak. Move the nozzle along the joint in one smooth action. At the end of each section wipe excess product away with a finger, spoon or spatula dipped in a 50/50 mix of water and detergent.
- Finish
Clean up the excess sealant with a damp cloth immediately. Allow it to cure for about 30 minutes before painting.
Related products
Our Factory
We are professional polyurethane sealant supplier with 16 years experience.
Our factory founded in 2006. Now, we are NO.7 silicone sealant manufacturer in China:
1/ Located in Quzhou city of Zhejiang province in China.
2/ Factory area: 200000 square meters
3/ Registered capital:200000000RMB. Total investment: 800000000RMB.
4/ Workers: More than 500.
5/ Annual output value: 100000 ton.
6/ Equipment:100000 ton organic silicon monomer device;30000 ton 107 glue device; 30000 ton 110 glue device; 3200 ton gas white carbon black device and so on.
7/ Cooperate philosophy: Integrity, pragmatic, synergy.
8/ Mission: Create a beautiful home.
Certificate
Sealant Package
Transport and storage
This product is flammable but not explosive, and can be delivered by normal means of transportation.
The products must be stored under 27 degree, in the cool and dry place.
Safety
It has no toxicity after entirely cured. Avoid eye contact it when operating. If happened, rinse opened eye under running water for several minutes. During the curing process, sealant will release a small amount of organic molecules. Construction should ensure good ventilation. If necessary, take protective measures. Please keep out of reach of children.
Contact Details
Await your enquiry, you may get super suprise from us!
Web: http://sunwaysilicone.en.made-in-china.com/
Audited Supplier 
){kind=link}