Customization: | Available |
---|---|
CAS No.: | 7085-85-0 |
Formula: | Mix |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
SIWAY 8230 is a two-part addition cure RTV. Comparing to condensation cure system, BESIL 8230 has following features:
FEATURES
• Two-part, 1:1 mixing ratio
• Medium viscosity Room temperature cure or rapid heat cure
• Addition cure system: no cure by-products
• Flame retardant: meets Underwriters Laboratories UL 94-V0
• Stable and flexible from -50°C(58°F) to +250°C (432°F)
• Flexible rubber - protects against mechanical shock and thermal cycling stress at components
• Excellent dielectric properties
Property |
GB/T | ASTM | Unit |
Value A/B |
Colour (Part A/Part B) |
Black /white |
|||
Viscosity at 23°C (Part A/Part B)¹ |
10247-2008 | D1084 | mPa.s |
3000±1000/3000±1000 |
Specific gravity at 23°C (Part A/Part B) |
13354-92 | D792 | g/cm3 |
1.52/1.52 |
Physical properties, cured 30 minutes at 150°C |
||||
Colour |
White or Black or Gray |
|||
Specific gravity at 23°C |
13354-92 | D792 | g/cm3 |
1.52 |
Thermal conductivity |
10297-1998 | D2214 | W/(m.K) |
0.8 |
APPLICATIONS
• Designed to protect against moisture, environmental attack, mechanical and thermal shock as well as vibration especially where good adhesion is required.
• Typical applications include: encapsulation of amplifiers, automotive electronic units, ballast, bleed resistors, connectors, flyback transformers, high voltage resistor packs, lifting magnets, power controllers, power supplies, radio frequency induction transformers and sensing devices.
Substrate preparation
All surfaces should be cleaned and degreased with a suitable solvent prior to potting. Care should be taken to ensure that all solvent is removed. For best adhesion, coat surfaces with BGX-706, following the instructions and precautions given for use of these products.
Mixing
How to apply
Curing
SIWAY 8230 should be cured using one of the following recommended schedules:
8 hours at 23°C, or 60 minutes at 70°C, or 30 minutes at 100°C, or 15 minutes at 150°C. Large components and assemblies may require longer times in order to reach the curing temperature
TYPICAL PROPERTIES
Property |
GB/T |
ASTM |
Unit |
Value A/B |
Colour (Part A/Part B)
|
|
|
|
Black /white |
Viscosity at 23°C (Part A/Part B)¹
|
10247-2008 |
D1084 |
mPa.s |
2100/2500 |
Specific gravity at 23°C (Part A/Part B) |
13354-92 |
D792 |
g/cm3 |
1.52/1.52 |
Catalysed, Mixed 1:1 by weight
|
||||
Potting life at 23°C |
10247-2008 |
D1084 |
mins |
60±10 |
Gel time at 23°C |
10247-2008 |
D1084 |
Hour |
1.5 |
Cure time at 100°C, 70°C |
|
|
minutes |
30, 60 |
Cure time at 23°C |
|
|
Hour |
6 |
Physical properties, cured 30 minutes at 150°C |
||||
Colour |
|
|
|
Black or Gray
|
Specific gravity at 23°C |
13354-92 |
D792 |
g/cm3 |
1.52 |
Durometer hardness |
531.1-2008 |
D2240 |
Shore A |
55±5 |
Tensile strength |
6328-86 |
D412 |
MPa |
2.6 |
Elongation at break |
6328-86 |
D412 |
% |
60 |
Tear strength- die B |
6328-86 |
D624 |
kN/m |
3.5
|
Thermal conductivity |
10297-1998 |
D2214 |
W/(m.K) |
0.8 |
Volume coefficient of thermal expansion |
20673-2006 |
|
ppm |
210 |
Electrical properties, cured 30 minutes at 150°C
|
||||
Dielectric strength, 2mm thickness |
1693-2007 |
D149 |
kV/mm |
20 |
Permittivity at 100Hz/100kHz |
1693-2007 |
D150 |
|
3.00 |
Dissipation factor at 100Hz/100kHz |
1693-2007 |
D150 |
|
0.009 |
Volume resistivity |
1692-92 |
D257 |
Ohm.cm |
1.1x10¹5 |
Comparative tracking index (IEC112) |
1692-92 |
|
|
600
|
Specification writers: These values are not intended for use in preparing specifications.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
PACKAGING AND STORAGE
hen stored at or below 35°C in the original unopened containers, this product has a usable life of 12months from the date of production.
Have to test if expired.
SIWAY 8230 is available in standard industrial container sizes. Other size should be approved.
Part A: 25kg/pail, 250kg/drum; Part B: 25kg/pail, 250kg/drum.
SIWAY 8230 Gray grade,part A,code:0105082;part B,code:0105083.
SIWAY 8230 Black grade,part A,code:0105460;part B,code:0105461.