MS 900 ms sealant for car windscreen
Features
| Item |
Value |
| Product Type |
Modified silane sealant & adhesive |
| Composition |
One-component |
| Curing Mechanism |
Moisture-curing |
| Application |
Assembly sealing and bonding of enclosures/boxes |
| Appearance |
White, Gray, Black |
| Consistency |
Paste-like, Thixotropic |
| Odor |
Very low odor |
One single-component, high-performance sealant based on advanced MS Polymer technology. It is solvent, silicone, and isocyanate free. It is excellent in UV, weather, and temperature resistance. Its adhesion over a wide variety of substrates is very good, and is paintable with most types of common industrial paints.
Main use
• Joint seals of prefabricated building balconies
• Waterproof and leak-proof seal for building roofs
• Sealing and bonding of flashing, gutter, wall cladding
• Caulking and Sealing of interior joints
• Many other industrial and architectural uses
• Joint seals of prefabricated building exterior wall
Instructions of use
1.Clean and dry the substrate' surface first of all.
2.Cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to full the joint.
Typical Properties
| Parameter Category |
Parameter Name |
Value / Description |
| Basic Properties |
Density (g/cm³) |
Approx. 1.46 (White, Gray, Black) |
| |
Sag Resistance |
Non-sag |
| |
Surface Drying Time (minutes)* |
Approx. 10-40 |
| |
Curing Rate (mm/24 hours) |
Approx. 3 |
| Mechanical Properties |
Shore Hardness (GB/T 531-2008) |
Approx. 23 |
| |
Tensile Strength (GB/T 528-2009) (MPa) |
Approx. 1.5 |
| |
Elongation at Break (GB/T 528-2009, speed 500 mm/min) (%) |
Approx. 500 |
| |
Modulus at 100% Elongation (GB/T 528-2009) (MPa) |
Approx. 0.4 |
| Movement Capability |
Movement Class |
25LM Grade |
| Curing/Shrinkage |
Volume Shrinkage (GB/T 13477.19-2017) (%) |
<2 |
| Surface Compatibility |
Paint Compatibility |
Generally paintable |
| Weather Resistance |
UV Resistance |
No significant surface changes |
| |
Test Duration (weeks) |
6 |
| |
QUV Resistance |
No significant surface changes |
| |
Test Duration (weeks) |
6 |
| |
Experimental Durability** |
(Not provided) |
| Temperature Range |
Service Temperature (°C) |
-40 to +90 |
| |
Short-Term Temperature Resistance (12h) (°C) |
100 |
| |
Application Temperature (°C) |
5 to 40 |
| |
|
|
Where you need it
Detail photos
Related products
Our Factory
We are professional silicone sealant supplier with 16 years experience.
Our factory founded in 2006. Now, we are NO.7 silicone sealant manufacturer in China:
1/ Located in Quzhou city of Zhejiang province in China.
2/ Factory area: 200000 square meters
3/ Registered capital:200000000RMB. Total investment: 800000000RMB.
4/ Workers: More than 500.
5/ Annual output value: 100000 ton.
6/ Equipment:100000 ton organic silicon monomer device;30000 ton 107 glue device; 30000 ton 110 glue device; 3200 ton gas white carbon black device and so on.
7/ Cooperate philosophy: Integrity, pragmatic, synergy.
8/ Mission: Create a beautiful home.
Certificate
Sealant Package
300ml *24cartridges/carton; or 590ml *20sausages/carton; or as request
Transport and storage
This product is flammable but not explosive, and can be delivered by normal means of transportation.
The products must be stored under 27 degree, in the cool and dry place.
Safety
It has no toxicity after entirely cured. Avoid eye contact it when operating. If happened, rinse opened eye under running water for several minutes. During the curing process, sealant will release a small amount of organic molecules. Construction should ensure good ventilation. If necessary, take protective measures. Please keep out of reach of children.
Contact Details
Await your enquiry, you may get super suprise from us!
Web: http://sunwaysilicone.en.made-in-china.com/
Audited Supplier 
){kind=link}