| Customization: | Available |
|---|---|
| Bonding Function: | Instant Adhesive |
| Morphology: | Solvent |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A two component room temperature neutral curing silicone sealant specifically developed for the manufacture of high performance insulated glass units. It is suitable for insulating glass units used in residential and commerical, and structural glazing applications.
| Processing-Formulating Benefits | |
|---|---|
| Cure System | 2-Part Cure |
| Number of Parts | Two |
| Where Used | Factory |
| Working Time | 5 to 10 Minutes |
| Typical Properties | |
|---|---|
| Adhesion to | Aluminum, Coated Glass, Enamelled and Reflective Glass, Plastic, Steel |
| Appearance | Opaque |
| Chemistry | Neutral |
| Color | Black, Grey, White |
| Durometer - Shore A | 41 |
| Movement | Low |
| Resistance Type | UV, Water |
| Shelf Life | 420 Days |
| Substrate | Non-porous |
| Tear Strength | 6 ppi |
| Tensile Strength | 0.89 psi |
| Thermal Conductivity | 0.27 W/m.K |
Features & Benefits
Applications
DOWSIL™ 3362 Insulating Glass Sealant is intended for use as a secondary sealant in a dual sealed insulating glass unit.
The high performance features incorporated into this product make it specially suitable for the following applications: o Insulating glass units for residential and commercial use. o Insulating glass units with high levels of UV exposure (free edge, greenhouse, etc.). o Insulating glass units incorporating specialty glass types. o Insulating glass units where high heat or humidity may be encountered. o Insulating glass in cold climates. o Insulating glass units used in structural glazing.
How to Use
Mixing and Dispensing Instructions DOWSIL™ 3362 Insulating Glass Sealant should be mixed in a ratio of 10:1 base to curing agent by weight, or equivalent 8:1 by volume for optimal properties. At this mix ratio, the sealant typically exhibits a working time of 5-10 minutes and allows units to be handled within two hours. Slight variations in mixing ratio can be tolerated, but these should not exceed 11:1 to 9:1 by weight or 8.8:1 to 7.2:1 by volume to ensure minimum properties are obtained
Mixing and Dispensing Instructions (Cont.) The sealant is compatible with most DOWSIL™ neutral curing construction sealants. Please contact our technical services department for more information. To obtain the ultimate physical properties from DOWSIL™ 3362 Insulating Glass Sealant, it is recommended that the base and curing agent are thoroughly mixed using an airless mixing system found on most existing commercially available two-part silicone dispensing machines. Catalyst Selection Different catalysts are available for DOWSIL™ 3362 Insulating Glass Sealant:
DOWSIL™ 3362 HV Catalyst is a medium viscosity paste, fast cure, which is suitable for meter mix equipment using a pressure pot or follower plate system for the catalyst.
DOWSIL™ 3362 HV/GER Insulating Glass Catalyst is a viscous paste fast cure and is suitable for meter mix equipment that uses a follower plate system for the catalyst. Equipment Cleaning When not being used it is recommended that the dispensing equipment be purged either with the uncatalyzed base, or flushed with a suitable solvent such as DOWSIL™ 3522 Concentrated Cleaning Solvent. If cured sealant has built up inside the equipment, it is recommended to flush the equipment for the appropriate time with DOWSIL™ 3522 Concentrated Cleaning Solvent. This solvent dissolves cured silicone sealant and provides optimum cleaning performance.
){kind=link}